Pumps
BE
CHEMICAL CENTRIFUGAL PLASTIC PUMP
WITH MECHANICAL SEAL IN MONOBLOC DESIGN
Overview
Drive rating:
up to 30 kW
up to 30 kW
Flow rate (Q):
up to 235 m3/h (1500 min-1)
up to 235 m3/h (1500 min-1)
Head (H):
up to 68 m (3000 min-1)
up to 68 m (3000 min-1)
Material sealing element (in contact with medium):
EPDM | FKM | FFKM
EPDM | FKM | FFKM
- STÜBBE E-CLASS: entry-level model in the STÜBBE pump family
- horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming)
- efficient hydraulics due to up-to-date calculation programs
- best possible price/performance ratio for elementary pumping tasks
- self-developed, innovative mechanical seal module kit (static pressure up to 6 bar)
- replaceable pump casing parts are made of solid plastic
- easy disassembly and assembly
- reduction of parts due to modular system
- solids load up to max. 5%
- viscosity up to max. 100 mm2/s
- operating temperature: PP up to max. 80 °C / PVDF up to max. 100 °C
Related Products
PTM
- compact pressure and temperature sensor PTM
- Ideal as a dry run protection device for pumps and for process monitoring
- Pressure range from 0.5 up to 10 bar
- alternative signal output interfaces (current loop/relay/Modbus RTU)
- Compact version for space-saving installation
- Flex version for difficult-to-reach or heavily contaminated locations
PPU
- The power unit for connecting your pump
- Housing prepared for mounting incl. 2 top-hat rails
- 3x M20 and 2x M32 cable glands
- IP66 ABS plastic housing
- Brand components
- Main switch 3-pole 25A/63A lockable
- 2 push-buttons and 2 operation indicators depending on version
- Overload relay
- Motor contactor
- Terminal strip depending on version
- From a power of 3.0 KW, soft starters are available instead of a motor contactor. This protects the pump during start-up and run-down and prevents water hammer.
- Option phase protection relay
- Option insulation monitor
- Option soft starter
- PTC tripping device option
PCU
- protection of your pump
- Alarm signal before pump failure
- Different sensors can be connected: pressure, temperature and level
- Processing of sensor values and transmission to a higher-level system
- Connection of shielded sensor cables possible
- Wide-range power supply 100-240VAC
- Clear display of sensor values in Uni-Display
- Data logger function with date stamp
- Data storage on microSD in CSV format
- Menu navigation in German, English, Italian, Spanish and French
- Updates of the sensor firmware with the help of the UNI-Display
- Saving and transferring parameters to other units