Pumps
NX
Standardized pump NX for chemicals DIN EN ISO 2858
Overview
Nominal size DN::
25 - 200
25 - 200
Drive rating:
up to 250 kW
up to 250 kW
Flow rate (Q):
up to 1000 m³/h
up to 1000 m³/h
Head (H):
up to 120 m
up to 120 m
Material sealing element (in contact with medium):
EPDM | FKM | FFKM | FEP
EPDM | FKM | FFKM | FEP
Connection:
Flange
Flange
- X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps
- Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It can withstand anything.
- Plastic standard pump for chemicals
- Extreme resistance
- Maximum safety
- Long-lived and sturdy
- Significantly improved service life
Related Products
PTM
- compact pressure and temperature sensor PTM
- Ideal as a dry run protection device for pumps and for process monitoring
- Pressure range from 0.5 up to 10 bar
- alternative signal output interfaces (current loop/relay/Modbus RTU)
- Compact version for space-saving installation
- Flex version for difficult-to-reach or heavily contaminated locations
PCU
- protection of your pump
- Alarm signal before pump failure
- Different sensors can be connected: pressure, temperature and level
- Processing of sensor values and transmission to a higher-level system
- Connection of shielded sensor cables possible
- Wide-range power supply 100-240VAC
- Clear display of sensor values in Uni-Display
- Data logger function with date stamp
- Data storage on microSD in CSV format
- Menu navigation in German, English, Italian, Spanish and French
- Updates of the sensor firmware with the help of the UNI-Display
- Saving and transferring parameters to other units
PPU
- The power unit for connecting your pump
- Housing prepared for mounting incl. 2 top-hat rails
- 3x M20 and 2x M32 cable glands
- IP66 ABS plastic housing
- Brand components
- Main switch 3-pole 25A/63A lockable
- 2 push-buttons and 2 operation indicators depending on version
- Overload relay
- Motor contactor
- Terminal strip depending on version
- From a power of 3.0 KW, soft starters are available instead of a motor contactor. This protects the pump during start-up and run-down and prevents water hammer.
- Option phase protection relay
- Option insulation monitor
- Option soft starter
- PTC tripping device option